How to install a second SSD in detail
How to install a second SSD, This article will show you how to add a second SSD to a Windows computer. It covers the required components, physical installation, and drive initialization with Windows Disk Management. This info is for Windows 10, 8.1, 8, and 7, respectively. So through the following lines, we are going to explain how to install a second SSD using simple steps to do, just keep reading to know.
How to install a second SSD?
Over time, files accumulate. You’ll eventually have to choose between removing old files and employing a supplementary storage device.
You can add storage to your computer by using a usb.
You could install a second SSD if your computer casing allows it and you have all of the essential components and equipment.
Steps to install a second SSD are as follows:
Clear the power cord from your computer then open the case directly.
Look for a free drive bay.
Take the drive caddy and replace it with your new SSD.
Replace the drive caddy in the drive bay.
Install a SATA data cable into a free SATA data cable connector on your motherboard.
SATA Power
How to install a second SSD? Find a SATA power connector that isn’t in use.
Connect your SSD disc to the SATA power and data connections.
Make sure that almost all of the wires are securely seated, and that nothing has been accidentally unplugged or knocked free.
Close your case, reconnect all of your cables, and power up your computer.
Getting Ready to Install a Second SSD
It takes two steps to install a second SSD in a Windows PC.
To get the operating system to detect and use the drive,
You must first physically insert it inside the PC and then set it up to use the Windows System Management utility.
What you will need
How to install a second SSD? If you want to add a second SSD to your PC, here’s what you’ll need:
A PC with an open drive bay
There is an open SATA data connector.
A solid-state drive (SSD)
To open the casing and put the drive in place, you’ll need a screwdriver.
A data cable for SATA
A SATA power connector is available.
If the SSD will be inserted in a 5.25-inch drive bay, you’ll need an adapter.
See also: How to upgrade laptop graphics using simple steps
The drive bay
An open drive bay and an open SATA data connection on your motherboard are the most significant of these elements.
Most computer systems have many open bays, and even most motherboards have multiple SATA connections for SSDs.
And other peripherals such as Blu-ray drives, and you should double-check that you have enough space before purchasing a new SSD.
Exception For laptops
How to install a second SSD? Laptops are something else, as most do not have enough space for a second SSD to be installed.
You won’t need a SATA connector if your laptop has enough space.
Power and data connections are incorporated into laptop drive bays.
You could buy a SATA controller that plugs into a PCI or PCIe slot if your motherboard doesn’t even have any open SATA ports.
If you run out of SATA power connections, you can use a Molex converter or a SATA power cable splitter.
In the end, how to install a second SSD? Note: Using Macrium Reflect 7 to clone an HDD to an SSD. Just go Clone Your Disk – Destination – Select the Disk to Clone to and select the drive you want to clone.
References